SELECA ist ein Tischanalysengerät, welches sowohl für die O2- als auch für die CO2-Messung geeignet ist. http://t.co/C7kJ7P34

CARBOCHECK二氧化碳分析仪
CARBOCHECK 便携二氧化碳分析仪配备一个最新的红外感应器, 带有温度补偿且耗能极低.
便携二氧化碳分析仪易于操作,精度可达0.1%且用途极广。
It measures the incoming air pressure and regulates the capacity of the internal pump for a constant flow independent of the status of the filter and the length of the supply pipe.
The instrument is equipped with 2 large LCD for an easy reading of the analysis and its forefront electronic minimize the response time. Moreover it has following characteristics:
- 永久内部时钟与日期时间设置
- 分析结果打印输出,并附带分析时间。
- Gap setting function between two printing processes
- Linear electrical output with 10bit resolution for tension and electricity volts and amps
- Cancellation of the electrical output via the menu to allow longer battery life during field operation
- Automatic calibration of the sensors from the menu with any sample gas concentration (even atmospheric air)
- Diagnostic function of correct operation of hardware with alarm signal on LCD
- Real time automatic filter control and dirty filter alarm
- Control of CO2 sensor operation and sensor damage alarm
- Led signal of battery charge
- Digital control of battery charge
- Manual battery charge button.
技术参数:
| CARBOCHECK | |||||
|
技术数据
|
| CARBOCHECK | |
| 气体类型 | CO2 |
| 测量范围 | 0-10 % |
| 精确度 | 0,1 % |
| 测量原理 | 红外线 |
| 气体取样 | 带自动流量控制的抽取 |
| 电源要求 | 220-240V - 50-60Hz - 可充电电池 |
| 重量 | 4 Kg |
| 输出 | 打印机 - 0-20mA o 0-1V |
| 体积 mm | 300x115x270 |




